SPECIFICATION OF PURE MOLYBDENUM POWDER

Impurities Maximum (ppm) Typical assay
Al 30 10-20
C 40 10-30
Ca 50 40
Cu - 10-20
Fe 150 50-110
K 700 300-400
Na 100 70
Ni 20 10-20
Mg 10 10
Si 50 30-50
W 1000 560-580
O2 0.3% 0.10-0.16%
Mo min. 99.7% typ:99.87%

Grainess (FSSS): 92% less than 5 mkm
Packing: 50-100 l metal barrels containing abt. 100-250 kgs material, bounded on palettes.
* Actual values may vary depending on source of raw material.


SPECIFICATION OF PRESINTERED MOLYBDENUM BARS

Impurities Maximum (ppm) Typical assay
Al 30 10-20
C 40 10-30
Ca 50 40
Cu 30 10-20
Cr 20 -
Fe 150 70-140
K 700 400
Na 100 70
Mg 10 10
Ni 20 20
Pb 2 -
S 40 -
Si 50 50
Sn 10 -
W 1000 570-590
O2+H2O 0.3% 0.10-0.12%
Mo min. 99.75% 99.86-99.87%

Grainess (FSSS): 92% less than 5 mkm
Pre-sintered at temperature: 1'200 C
Size: 115 x 38 x 35 mm
Packing: 50 l metal barrels containing abt. 200 kgs material, bounded on palettes.
* Actual values may vary depeding on source of raw material.


SPECIFICATION OF MOLYBDENUM BARS (full sintered)

Impurities Maximum (ppm) Typical assay*
Al 30 10
C 40 -
Ca+Mg 70 50-60
Cu 30 -
Cr 20 -
Fe 150 70-100
K+Na 800 570
Ni 20 20
Pb 2 -
S 40 -
Si 50 -
Sn 10 -
W 1000 600-700
O2+H2O 0.1%  
Mo min 99.75% 99.84-99.86%

Grainess (FSSS): 92% less than 5 mkm
Sintering temperature: 1'800 C
Size: 400 x 15 x 15 mm
Packing: 50 l metal barrels containing abt. 200 kgs material, bounded on palettes.
* Actual values may vary depending on source of raw material.


SPECIFICATION OF PURE MOLYBDENUM OXIDE (MoO3)

Impurities Maximum (ppm) Typical assay*
Fe 150 50-110
Al 30 10
Ni 30 10
Si 40 25-40
Mg 20 10
K+Na 800 550-700
Ca 50 30-50
P 20 10
C 40 23-38
S 40 17-37
W 400 200-390
Cu 20 10
Zn 20 10
Mo min. 66.0% typ:66.53-66.56%

Grainess (FSSS): 5-15 mkm
Packing: 1'000-2'000 kgs PP/PE Big-Bags
* Actual values may vary depending on source of raw material.